军哥进来帮忙下。谢谢。。MYsql重启出错。
今天就因为SENDMAIL失效。重新安装的时候。发现有200多个东西没有升级。就输入apt-get update.
apt-gert upgrade
接下来重启lnmp就出现这种情况了
ot@MyVPS1650:~# ps -ef |grep mysql
root 502149610 15:16 pts/0 00:00:00 grep mysql
root@MyVPS1650:~# /etc/init.d/mysql start
Starting MySQL
.The server quit without updating PID file (/var/run/mysqld/mysqld.pid). ... failed!
root@MyVPS1650:~# ps aux |grep mysq*
root 57040.00.1 3436 784 pts/0 S+ 15:18 0:00 grep mysq*
root@MyVPS1650:~# mv /etc/my.cnf /etc/my.cnf.backup
root@MyVPS1650:~# /etc/init.d/mysql start
Starting MySQL
.The server quit without updating PID file (/var/run/mysqld/mysqld.pid). ... failed!
蛋疼。。数据库没有备份。。。
以下是网络上搜索到的所有解决方法。[已经解决]
my.cof：（这个我就不知道了）# Example MySQL config file for medium systems.#
# This is for a system with little memory (32M - 64M) where MySQL plays
# an important part, or systems up to 128M where MySQL is used together with
# other programs (such as a web server)
#
# MySQL programs look for option files in a set of
# locations which depend on the deployment platform.
# You can copy this option file to one of those
# locations. For information about these locations, see:
# http://dev.mysql.com/doc/mysql/en/option-files.html
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.
# The following options will be passed to all MySQL clients
#password = your_password
port = 3306
socket = /tmp/mysql.sock
# Here follows entries for some specific programs
# The MySQL server
port = 3306
socket = /tmp/mysql.sock
datadir = /usr/local/mysql/var
skip-external-locking
key_buffer_size = 16M
max_allowed_packet = 1M
table_open_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking
# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin
# binary logging format - mixed recommended
binlog_format=mixed
# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1
# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=, MASTER_PORT=,
# MASTER_USER=, MASTER_PASSWORD= ;
#
# where you replace , ,by quoted strings and
# by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host =
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user =
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port =
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin
# Uncomment the following if you are using InnoDB tables
innodb_data_home_dir = /usr/local/mysql/var
innodb_data_file_path = ibdata1:10M:autoextend
innodb_log_group_home_dir = /usr/local/mysql/var
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
innodb_buffer_pool_size = 16M
innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
innodb_log_file_size = 5M
innodb_log_buffer_size = 8M
innodb_flush_log_at_trx_commit = 1
innodb_lock_wait_timeout = 50
quick
max_allowed_packet = 16M
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
key_buffer_size = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M
interactive-timeout
[ 本帖最后由 winson 于 2013-10-7 17:47 编辑 ] 还有一些什么 把mysql的进程kill掉之类的我都试过了。。。没办法。。 已经解决，更新下MYSQL版本或者重新安装一键包。。
lnmp debian 7 ds VPS 安装错误 ovz的
麻烦各位帮忙看看 lnmp安装日志：
页:
[1]